TIMESAVER PRODUCTS CO -- TIMESAVER LAPPING COMPOUNDS #80N FINE  -- 5350-00N019224
<pre>=====================  Product Identification  =====================

Product ID:TIMESAVER LAPPING COMPOUNDS #80N FINE
MSDS Date:01/16/1989
FSC:5350
NIIN:00N019224
=== Responsible Party ===
Company Name:TIMESAVER PRODUCTS CO
Address:12428 HWY 99
City:EVERETT
State:WA
ZIP:98204
Country:US
Info Phone Num:206-347-1611
Emergency Phone Num:206-347-1611
Preparer's Name:A J MENARD
CAGE:2K985
=== Contractor Identification ===
Company Name:TIMESAVER PRODUCTS CO
Address:12428 HWY 99 BAY 52
Box:City:EVERETT
State:WA
ZIP:98204-5502
Country:US
Phone:206-347-1611
CAGE:2K985

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, CRYSTALLINE - QUARTZ
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 20-45%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:ABRASIVES; (GROUND NATURAL)
Fraction by Wt: 20-35%

Ingred Name:BARIUM SULFATE
CAS:7727-43-7
RTECS #:CR0600000
Fraction by Wt: 25-40%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:DETERGENT
Fraction by Wt: 5-25%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OVEREXPOSURE TO RESPIRABLE
    SILICA ABOVE THE THRESHOLD LIMIT MAY CAUSE SCARRING OF THE LUNGS
    W/COUGHING, SHORTNESS OF BREATH OR SILICOSIS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA: CLASS 2A (IARC)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA, GASTROENTITIS.

=======================  First Aid Measures  =======================

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
    EYES W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE 
    FROM MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER FOG OR FLOOD.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FUME, VAPOR & DUST MAY OCCUR & ARE
    CONSIDERED TOXIC. THE PRODUCT OR DUST CAN REACT WITH STRONG
    OXIDIZING AGENTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VACUUM CLEAN. DO NOT BROOM SWEEP. KEEP IN
    CLOSED CONTAINER UNTIL DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP IN A CLOSED CONTAINER IN A DRY
    PLACE. DO NOT PERMIT CONTACT WITH ACIDS, ALKALIES OR STRONG
    OXIDIZING AGENTS.
Other Precautions:AVOID BREATHING DUST.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN NECESSARY, USE NIOSH/MSHA APPROVED DUST
    RESPIRATOR, HEPA FILTER.
Ventilation:LOCAL EXHAUST IN FRONT OF WORKER. MECHANICAL (GEN) NORMAL
    AIRBORNE DUST REMOVAL. OSHA APPROVED IF OVER TLV LIMITS.
Protective Gloves:DESIRABLE; NOT NECESSARY.
Eye Protection:DESIRABLE; NOT NECESSARY.
Other Protective Equipment:IF PRLNG EXPOS TO DUST ABOVE TLV LEVELS,
    DISPOSABLE COVERALLS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:2.3
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS WHITE POWDER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION,
    COMPOUNDS EMIT SULFUR DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SANITARY LANDFILL OR OTHER EPA APPROVED METHOD.
    DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
    REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.